SPC Performance EZ Cam XR Bolts (Pair) (Replaces 18mm Bolts) 81295

Make a two bolt strut adjustable up to +-1.75deg camber with the EZCam from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change. SPC's patented EZCams: 1. Make camber changes a cost effective, quick one-man job without grinding 2. Are grade 12.9 and provide the best clamp load with the highest safety factor in the industry 3. Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors' ~ 20 hrs, to avoid any hydrogen embrittlement issues, and to be environmentally friendly 4. Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment. Make a two bolt strut adjustable up to ±1.75° camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change. The 81139 Magnetic Camber Gauge is a great companion tool for the EZCam, attach it to the rotor and watch camber change as you roll the cam bolt.

Specifications:

• Front Adjustment range: Camber ±1.75°
• Installation time: .4 hr/side
• Required: 1 kit per axle