This set of two-piece 11-inch high trailer ramps makes loading your race car, sports car or other low-profile vehicle an easy, scrape-free process on track day, at a car show, or during a multi-state trip.

Use our trailer ramp calculator to make sure you're choosing the ramp that's tailored to your car and trailer needs. Both 11-inch high trailer ramps measure 131 total inches long (each piece measures approx. 68 inches with a center overlap). The initial angle of approach is only 4.3 degrees, and it increases to 5.4 degrees at the top piece of the ramp. Each ramp only weighs 17 pounds in total, yet can hold up to 1,500 pounds. The upper pieces have a built-in carrying strap. They are ideal for tire widths up to 12 inches. To use them with your trailer, simply lower your trailer door down into the 5-inch long by 3-inch high notch and drive your car up and into your trailer - it’s that easy!

These trailer ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace. See instruction manual link to review full usage guidelines.

Is your trailer door too steep to get your car to the track or autocross? Are you tired of hauling around heavy, unsafe boards to use as a makeshift ramp extension? Race Ramps has the solution for you: simply place your trailer door on the notch of our specially-designed Trailer Ramps and decrease your angle of approach to as little as 4.3 degrees.

These hassle-free, lightweight ramps are ideal for low-ground-clearance cars with extra-wide tires. Numerous size options are available in our one- and two-piece designs, with and without flap cut-outs. Use our ramp calculator above to determine which Trailer Ramps will work best for your car and trailer, and let us know if you have any questions. We are happy to make a custom set if our standard options don't work—just give us a call!

Trailer Ramps are 100% solid, made with an exclusive patented process that coats high-density expanded foam with a traction surface for a lightweight ramp solution that is strong yet durable. The ramps will not slide, scratch, or otherwise damage any floor type and can hold up to 1,500 lbs. per ramp for a total vehicle weight capacity of 6,000 lbs.