Description
2021-24 Ford Bronco 4WD
This heavy duty Track Bar bracket provides a new lower mounting position for the factory track bar to re-center the rear axle under the vehicle for use with a 3"-4" lift height. By re-centering the axle under the vehicle, it provides proper tracking of the wheels and suspension front to rear. This helps improve the on highway trackability of the vehicle.
The bracket attaches to the axle, forming to the factory mount. It provides a new mounting hole for the Track bar that is slightly higher and offset to one side compared to the stock bracket.
The heavy duty construction consists of 1/4" thick steel that is formed and welded with gussets for strength using grade 8 fasteners.
Part Numbers
| QTY | PART # | DESCRIPTION |
|---|---|---|
| 1 | FTS22345 | Component Box |
? California Prop 65 Warning
FOOTNOTES
240. For use with 3" or 4" lift systems only.
Additional information
| Year | |
|---|---|
| Make | |
| Model | |
| Drive |
-
Brand
Brand
THE PROCESS
With over 25 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.
DESIGN
Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
FUNCTION
New vehicle platforms now require a full integration of the vehicle's electronics and sensors into the suspension design in order for the vehicle to properly function. Fabtech has invested into proprietary development processes and technologies to aid in properly designing new vehicle suspension systems that lead the industry.
TESTING
In-field testing and multiple vehicle fit checks ensure products will fit properly during installation and provide years of trouble-free service with superior vehicle ride qualities.
IN-HOUSE MANUFACTURING
To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production.
-
Fitment
Fitment
-
Warranty
Warranty
Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the Fabtech suspension component product was originally installed, for defects in workmanship and materials.The Limited Lifetime Warranty excludes the following Fabtech items and is warranted for 1 year from the date of purchase for defects in workmanship: bushings, bump stops, ball joints, bearings, tie rod ends, limiting straps, cross shafts, heim joints, and driveshafts. These parts are subject to wear and are not considered defective when worn.
-
Reviews
Reviews
THE PROCESS
With over 25 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.
DESIGN
Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
FUNCTION
New vehicle platforms now require a full integration of the vehicle's electronics and sensors into the suspension design in order for the vehicle to properly function. Fabtech has invested into proprietary development processes and technologies to aid in properly designing new vehicle suspension systems that lead the industry.
TESTING
In-field testing and multiple vehicle fit checks ensure products will fit properly during installation and provide years of trouble-free service with superior vehicle ride qualities.
To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production.
Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the Fabtech suspension component product was originally installed, for defects in workmanship and materials.The Limited Lifetime Warranty excludes the following Fabtech items and is warranted for 1 year from the date of purchase for defects in workmanship: bushings, bump stops, ball joints, bearings, tie rod ends, limiting straps, cross shafts, heim joints, and driveshafts. These parts are subject to wear and are not considered defective when worn.
Our Guarantee
-
Best price Guaranteed
Best Price Guaranteed
-
Live Chat Support
Live Chat Support- Receive quick answers to your questions during business hours.
-
Fastest Shipping
Fastest Shipping- Orders ship within 24 hours. Exclusions Apply.
-
30 day return Guarantee
30 Day Guarantee- Refunds within 30 days of the original order date. Exclusions Apply.
Spec Sheet
- BrandFabtech
- SKUfabFTS22345
- UPC674866112865
