Description
2021-24 Ford Bronco 4WD
As an upgrade to the factory Bronco tie rods, Fabtech offers a heavy duty replacement system that provides increased strength for oversized tires and aggressive offroad use.
The Fabtech kit replaces the entire Bronco tie rod assembly. From the inner joint that attaches to the steering rack all the way out to the steering knuckle. This is not an add on tie rod kit like others. It?s the proper way to upgrade your Bronco?s steering.
The inner clevis is constructed with 17-4 heat treated stainless steel and mates to a 3/4" ID PTFE lined FK heim for unsurpassed strength. There is a nitrile spec boot that seals the rack to the billet adjusting sleeve to keep it clean inside for trouble free operation.
The machined billet adjusting sleeve is larger than the factory section providing outstanding strength for those hard core offroad trips. The clear anodized coating of the adjusting sleeves accents the factory aluminum lower control arms for a high end suspension appearance.
The factory Bronco outer tie rod is replaced by 3/4" ID PTFE lined FK heim as well and attaches to the steering knuckle with 17-4 heat treated stainless steel tapered pins. The taper is the same as the factory tie rod so there is no drilling of the knuckle required for installation and can be put back to stock if required.
This high quality Fabtech Tie Rod kit has been extensively tested in the most rugged offroad conditions. It is the pinnacle of steering upgrades for the discerning Bronco owner.
Features
- 3/4" ID PTFE Lined FK Heim ends
- 17-4 Heat treated stainless steel clevises and tapered pins
- Billet aluminum adjusting sleeves with wrench flats for easy adjustments
- Nitrile rubber spec dust boot to protect steering rack
- No drill installation
- Direct replacement for factory tie rods assembly
Part Numbers
| QTY | PART # | DESCRIPTION |
|---|---|---|
| 1 | FTS22349 | Component Box |
? California Prop 65 Warning
FOOTNOTES
255. Does not fit vehicles equipped with Hoss 3.0 package.
270. Does not fit vehicles equipped with 5?/6? Fabtech suspension kit.
Additional information
| Year | |
|---|---|
| Make | |
| Model | |
| Drive |
THE PROCESS
With over 25 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.
DESIGN
Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
FUNCTION
New vehicle platforms now require a full integration of the vehicle's electronics and sensors into the suspension design in order for the vehicle to properly function. Fabtech has invested into proprietary development processes and technologies to aid in properly designing new vehicle suspension systems that lead the industry.
TESTING
In-field testing and multiple vehicle fit checks ensure products will fit properly during installation and provide years of trouble-free service with superior vehicle ride qualities.
To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production.
Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the Fabtech suspension component product was originally installed, for defects in workmanship and materials.The Limited Lifetime Warranty excludes the following Fabtech items and is warranted for 1 year from the date of purchase for defects in workmanship: bushings, bump stops, ball joints, bearings, tie rod ends, limiting straps, cross shafts, heim joints, and driveshafts. These parts are subject to wear and are not considered defective when worn.
Our Guarantee
-
Best price Guaranteed
Best Price Guaranteed
-
Live Chat Support
Live Chat Support- Receive quick answers to your questions during business hours.
-
Fastest Shipping
Fastest Shipping- Orders ship within 24 hours. Exclusions Apply.
-
30 day return Guarantee
30 Day Guarantee- Refunds within 30 days of the original order date. Exclusions Apply.
Spec Sheet
- BrandFabtech
- SKUfabfts22349
- UPC674866112971
