A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +38 horsepower and up to +46 lbs. x ft. of torque verified by our in house dyno.
Direct Plug & Play Power: This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response.
In-Cabin On-the-Fly Power Adjustments: SCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin.
High Quality Case & Wire Harness: aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors, plugs directly into the stock wiring harness connectors and sensors.
High Precision and Quality: SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.
aFe POWER does not recommend to use with any other tuners or modules.
This SCORCHER GT is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Dyno-Proven Gains up to +38 HP & +46 Lbs. x Ft. TQ (Tested on a Civic Si)
- Quick and Easy, Plug-and-Play Installation (~30 Mins)
- Increases Turbo Boost to Improve Performance, Efficiency, and Throttle Response
- In-Cabin, On-the-Fly Power Adjustments via LED Light Switch
- Leaves No Trace on ECU (No Footprint)
- High Quality Case and Wiring Harness w/ Factory Style Connectors
- Compatible with Other aFe POWER Products
ABOUT aFe POWER
advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.
We do so many cool things here at aFe POWER, but generally it takes someone getting a chance to tour the facility to really get the impact of everything that goes on “behind the scenes” here at our Southern California compound and what aFe is capable of. So here is your chance to take a peek, and I’m sure come back with the same phrase we hear so much. “I had no idea you guys did all of that!” Take a look at this video! In-house capabilities include manufacturing of air filters, air intake systems, exhaust systems, headers, torque converters, intercoolers, and feature CNC machining, CAD design, 3D printing, 3D scanning, fabrication, dyno testing, mandrel tube bending, flow and filtration testing, assembly, kitting, warehousing. and much more!
The aFe product line includes over 2,500 applications, which are all designed developed and manufactured in Corona, California. The aFe Power product line-up includes air filters, air intake and exhaust systems for most late model cars and trucks.
In the fall of 2007, aFe added diesel fluid filters for diesel applications. In 2008, aFe introduced the Aries 1 and Aries 2 filters and intakes for popular powersport applications. 2009 saw the release of the BladeRunner intercooler Intercooler for diesel applications as well as the Takeda USA intake line for sport compacts.
In 2012 aFe Power entered into the differential cover and transmission pan market. 2011 saw the release of a new turbocharger and Scorcher Programmer product lines. aFe produces three versions of air filter media including their original Pro 5R, Pro Guard 7 and Pro Dry S. The Pro 5R media is a five-layer cotton gauze media to maximize filtration and airflow. The patented Pro-Guard 7 is their seven-layer filter media combining the Pro 5R media with the addition of two additional layers of synthetic media. Both of these media require filter recharging oil. The Pro Dry S media is a three-layer synthetic media, requires no filter oil, and cleans with soap and water. All aFe Power filters are washable and reusable.
aFe specializes in the diesel truck performance aftermarket with a line-up of products for these applications. aFe’s Pro Guard D2 filter program includes oil, fuel and transmission filters. The Blade Runner intake manifold inlet manifold released in 2007, pushes toward complete air flow management systems. aFe produces exhaust systems for diesel applications.
LIMITED WARRANTY STATEMENT
aFe POWER Limited Warranty applies solely to products purchased from aFe POWER (online or by phone) or from an authorized aFe POWER retailer to be free from manufacturer’s defects due to workmanship and materials. The warranty period begins from the confirmed shipment arrival date and covers the applicable period in the warranty table. All warranty is limited to the repair or replacement of the aFe POWER product. Any warranty period will not be extended if we repair or replace the product.
- This warranty applies only to the original purchaser of the product and is non-transferable.
- Proof of Purchase is required for all warranty claims.
- Limited Lifetime Warranty products last for the lifetime of the product against manufacturer defects, not normal wear and tear. It is limited to the lifetime of the part and not of the vehicle.
- Warranty is valid given that all aFe POWER instructions for installation, service, and/or cleaning were properly followed.
- Proper maintenance with regular product inspections is required to ensure warranty coverage.
- Any part replaced under warranty will carry the remainder of the original warranty or 90 days, whichever is longer.
NOT COVERED UNDER AFE POWER LIMITED WARRANTY
- Any product not purchased directly from aFe POWER (online or by phone) or an aFe POWER authorized dealer and does not carry an original, valid Proof of Purchase
- For parts used on "race" vehicles
- Any product that is not within the Limited Warranty period or presented by the original purchaser
- Any costs or damages due to improper installation, abuse, improper maintenance, unauthorized repair, or alteration
- Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe POWER product
- Any products sold under aFe POWER’s Private Label Program
- All items labeled Closeout, Overstock, or Extra Savings are final sales and not covered under warranty.
WARRANTY CLAIM PROCESS
aFe POWER reserves the right to inspect any product to determine the warranty coverage. If a product is found to be defective, it will become the property of aFe POWER and be replaced. If a product is determined to be not covered under the Limited Warranty, it will be returned to you. All aFe POWER warranty decisions are final.
- To initiate a warranty claim, please submit your request with your original Order Number and Proof of Purchase to Tech Support.
- You will receive a Warranty Claim Number and an RGA (Returns Good Authorization) number to return the product. Be sure to retain both to track your claim.
- We will not send any replacement parts before receiving the warranty return.
- Allow 5 to 6 weeks for the warranty process. Replacement products are subject to availability.
Product Category | Warranty Duration | P/N Prefix |
Air Intake Systems | Components: 2 Years/Filter: Limited Lifetime | 5X, 75, F1, F2, TA, TL, TM, TR |
Cabin Air Filters | 90 Days | 35 |
Chemicals | 90 Days | 90 |
Component Parts | 90 Days | 03, 05, 59 |
Direct OE Replacement Filters | Limited Lifetime | 10, 11, 30, 31, 71, 73 |
EGR Coolers | 2 Years | 46-9 |
Exhaust Manifolds | 2 Years | 46-4 |
Exhaust Products | Components: 2 Years/Finish: 90 Days | 47, 48, 49 |
Expansion Tanks | Components: 2 Years/Finish: 90 Days | 46-51 |
Exterior | Components: 2 Years/Finish: 90 Days | 79-2 |
Fluid Filters | 90 Days | 44 |
Fuel System | 2 Years | 42 (except 42-31) |
Fuel Tank | Limited Lifetime | 42-31 |
H/D OE Replacement Filters | 2 Years | 70 |
Ignition Coils | 1 year | P/N Group 77-92 |
Intake Manifolds | Components: 2 Years/Finish: 90 Days | 46-1 |
Intercoolers & Charge Pipes | Components: 2 Years/Finish: 90 Days | 46-2 |
Marketing Gear | 90 Days | 40 |
Pans & Covers | Limited Lifetime | 46-7 |
Power Sports OE Replacement | 10 Years | 81, 87 |
Power Sports Intake Systems | 2 Years | 85 |
Pre-Filters | 2 Years | 28 |
Pulleys | Components: 2 Years/Finish: 90 Days | 79-1 |
Oil Coolers | 2 Years | 46-8 |
Radiators | 2 Years | 46-52, 46-53 |
Scorcher Modules | 1 Year | 77 |
Sprint Boosters | 3 Years | 77-1 |
Suspension - Direct Fit | Components: 2 Years/Finish: 90 Days | 1XX, 2XX, 3XX, 4XX, 5XX, 6XX, 7XX, 8XX, 37 |
Suspension - Universal Fit | 90 Days | 5XXXX, 6XXXX |
Throttle Body | 1 Year | 46-3 |
Throttle Body Spacers | 2 Years | 46-3 |
Turbochargers | 2 Years | 46-6 |
Universal Filters (including R-IAF) | 2 Years | 18, 20, 21, 23, 24, 72, TF |
DISCLAIMER
No other warranty expressed or implied applies, nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
PRICING / TYPOGRAPHICAL ERRORS
aFe POWER continuously provides real-time, accurate information and updates to our website and storefront. Due to the immediate nature of these updates, correcting any errors and/or omissions can happen anytime without prior notice. aFe POWER is not responsible for any additional charges, labor, loss, or damage incurred because of information, correct or incorrect, referenced, or products purchased by aFe POWER. aFe POWER and aFePower.com reserve the right to cancel undelivered orders based on inaccurate information.
Our Guarantee
-
Best price Guaranteed
Best Price Guaranteed
-
Live Chat Support
Live Chat Support- Receive quick answers to your questions during business hours.
-
Fastest Shipping
Fastest Shipping- Orders ship within 24 hours. Exclusions Apply.
-
30 day return Guarantee
30 Day Guarantee- Refunds within 30 days of the original order date. Exclusions Apply.
Spec Sheet
- BrandaFe
- SKUafe77-46601
- UPC802959775202