Unique One-Piece High Quality Housing:
A custom computer-designed roto-molded housing, made from high quality cross-linked polyethylene plastic, eliminates the use of multiple components and ensures the coolest air intake charge available. This housing is designed for a perfect fitment into the engine compartment and matches the plastic engine cover and trim. Also included is our stainless steel custom aFe POWER laser etched washers and bolts.
Roto-Molded Tube:
This system uses a high quality cross-linked polyethylene plastic dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation.
High-Quality Air Scoop:
A high quality computer-designed air scoop guides cool ambient air from behind the front main grille and directly to the performance air filter. This intake scoop is also constructed with high quality cross-linked polyethylene plastic for perfect fitment and sleek design.
Large 3-Layer "Oil-Free" Performance Air Filter:
This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 6" oval flange and is 5" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel T-bolt clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Also included, is our stainless steel custom aFe POWER laser etched dresser washer and bolts. Momentum intakes are designed with fewer parts for a quick and simple installation.
Note:
Optional Momentum GT carbon fiber intake system housing cover (P/N: 54-74207-C) sold separately.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fits:
2009-2014 Sedan CTS-V
2011-2014 Wagon CTS-V
2011-2015 Coupe CTS-V
- Outflows Factory Intake by 41%
- Measured Flow: 550 CFM @ 7" H2O
- One-Piece Roto-Molded Sealed Housing
- Computer-Designed Intake Tube, Housing, and Scoop
- Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Scoop Easily Snaps Into Airbox to Direct Cool Air Into the Intake System for Maximum Performance
- Custom aFe POWER Laser-Etched Stainless-Steel Washers and Bolts
- Direct Fit with Optional Carbon Fiber Housing Cover P/N: 54-74207-CV (Sold Separately)
ABOUT aFe POWER
advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.
We do so many cool things here at aFe POWER, but generally it takes someone getting a chance to tour the facility to really get the impact of everything that goes on “behind the scenes” here at our Southern California compound and what aFe is capable of. So here is your chance to take a peek, and I’m sure come back with the same phrase we hear so much. “I had no idea you guys did all of that!” Take a look at this video! In-house capabilities include manufacturing of air filters, air intake systems, exhaust systems, headers, torque converters, intercoolers, and feature CNC machining, CAD design, 3D printing, 3D scanning, fabrication, dyno testing, mandrel tube bending, flow and filtration testing, assembly, kitting, warehousing. and much more!
The aFe product line includes over 2,500 applications, which are all designed developed and manufactured in Corona, California. The aFe Power product line-up includes air filters, air intake and exhaust systems for most late model cars and trucks.
In the fall of 2007, aFe added diesel fluid filters for diesel applications. In 2008, aFe introduced the Aries 1 and Aries 2 filters and intakes for popular powersport applications. 2009 saw the release of the BladeRunner intercooler Intercooler for diesel applications as well as the Takeda USA intake line for sport compacts.
In 2012 aFe Power entered into the differential cover and transmission pan market. 2011 saw the release of a new turbocharger and Scorcher Programmer product lines. aFe produces three versions of air filter media including their original Pro 5R, Pro Guard 7 and Pro Dry S. The Pro 5R media is a five-layer cotton gauze media to maximize filtration and airflow. The patented Pro-Guard 7 is their seven-layer filter media combining the Pro 5R media with the addition of two additional layers of synthetic media. Both of these media require filter recharging oil. The Pro Dry S media is a three-layer synthetic media, requires no filter oil, and cleans with soap and water. All aFe Power filters are washable and reusable.
aFe specializes in the diesel truck performance aftermarket with a line-up of products for these applications. aFe’s Pro Guard D2 filter program includes oil, fuel and transmission filters. The Blade Runner intake manifold inlet manifold released in 2007, pushes toward complete air flow management systems. aFe produces exhaust systems for diesel applications.
LIMITED WARRANTY STATEMENT
aFe POWER Limited Warranty applies solely to products purchased from aFe POWER (online or by phone) or from an authorized aFe POWER retailer to be free from manufacturer’s defects due to workmanship and materials. The warranty period begins from the confirmed shipment arrival date and covers the applicable period in the warranty table. All warranty is limited to the repair or replacement of the aFe POWER product. Any warranty period will not be extended if we repair or replace the product.
- This warranty applies only to the original purchaser of the product and is non-transferable.
- Proof of Purchase is required for all warranty claims.
- Limited Lifetime Warranty products last for the lifetime of the product against manufacturer defects, not normal wear and tear. It is limited to the lifetime of the part and not of the vehicle.
- Warranty is valid given that all aFe POWER instructions for installation, service, and/or cleaning were properly followed.
- Proper maintenance with regular product inspections is required to ensure warranty coverage.
- Any part replaced under warranty will carry the remainder of the original warranty or 90 days, whichever is longer.
NOT COVERED UNDER AFE POWER LIMITED WARRANTY
- Any product not purchased directly from aFe POWER (online or by phone) or an aFe POWER authorized dealer and does not carry an original, valid Proof of Purchase
- For parts used on "race" vehicles
- Any product that is not within the Limited Warranty period or presented by the original purchaser
- Any costs or damages due to improper installation, abuse, improper maintenance, unauthorized repair, or alteration
- Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe POWER product
- Any products sold under aFe POWER’s Private Label Program
- All items labeled Closeout, Overstock, or Extra Savings are final sales and not covered under warranty.
WARRANTY CLAIM PROCESS
aFe POWER reserves the right to inspect any product to determine the warranty coverage. If a product is found to be defective, it will become the property of aFe POWER and be replaced. If a product is determined to be not covered under the Limited Warranty, it will be returned to you. All aFe POWER warranty decisions are final.
- To initiate a warranty claim, please submit your request with your original Order Number and Proof of Purchase to Tech Support.
- You will receive a Warranty Claim Number and an RGA (Returns Good Authorization) number to return the product. Be sure to retain both to track your claim.
- We will not send any replacement parts before receiving the warranty return.
- Allow 5 to 6 weeks for the warranty process. Replacement products are subject to availability.
Product Category | Warranty Duration | P/N Prefix |
Air Intake Systems | Components: 2 Years/Filter: Limited Lifetime | 5X, 75, F1, F2, TA, TL, TM, TR |
Cabin Air Filters | 90 Days | 35 |
Chemicals | 90 Days | 90 |
Component Parts | 90 Days | 03, 05, 59 |
Direct OE Replacement Filters | Limited Lifetime | 10, 11, 30, 31, 71, 73 |
EGR Coolers | 2 Years | 46-9 |
Exhaust Manifolds | 2 Years | 46-4 |
Exhaust Products | Components: 2 Years/Finish: 90 Days | 47, 48, 49 |
Expansion Tanks | Components: 2 Years/Finish: 90 Days | 46-51 |
Exterior | Components: 2 Years/Finish: 90 Days | 79-2 |
Fluid Filters | 90 Days | 44 |
Fuel System | 2 Years | 42 (except 42-31) |
Fuel Tank | Limited Lifetime | 42-31 |
H/D OE Replacement Filters | 2 Years | 70 |
Ignition Coils | 1 year | P/N Group 77-92 |
Intake Manifolds | Components: 2 Years/Finish: 90 Days | 46-1 |
Intercoolers & Charge Pipes | Components: 2 Years/Finish: 90 Days | 46-2 |
Marketing Gear | 90 Days | 40 |
Pans & Covers | Limited Lifetime | 46-7 |
Power Sports OE Replacement | 10 Years | 81, 87 |
Power Sports Intake Systems | 2 Years | 85 |
Pre-Filters | 2 Years | 28 |
Pulleys | Components: 2 Years/Finish: 90 Days | 79-1 |
Oil Coolers | 2 Years | 46-8 |
Radiators | 2 Years | 46-52, 46-53 |
Scorcher Modules | 1 Year | 77 |
Sprint Boosters | 3 Years | 77-1 |
Suspension - Direct Fit | Components: 2 Years/Finish: 90 Days | 1XX, 2XX, 3XX, 4XX, 5XX, 6XX, 7XX, 8XX, 37 |
Suspension - Universal Fit | 90 Days | 5XXXX, 6XXXX |
Throttle Body | 1 Year | 46-3 |
Throttle Body Spacers | 2 Years | 46-3 |
Turbochargers | 2 Years | 46-6 |
Universal Filters (including R-IAF) | 2 Years | 18, 20, 21, 23, 24, 72, TF |
DISCLAIMER
No other warranty expressed or implied applies, nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
PRICING / TYPOGRAPHICAL ERRORS
aFe POWER continuously provides real-time, accurate information and updates to our website and storefront. Due to the immediate nature of these updates, correcting any errors and/or omissions can happen anytime without prior notice. aFe POWER is not responsible for any additional charges, labor, loss, or damage incurred because of information, correct or incorrect, referenced, or products purchased by aFe POWER. aFe POWER and aFePower.com reserve the right to cancel undelivered orders based on inaccurate information.
Our Guarantee
-
Best price Guaranteed
Best Price Guaranteed
-
Live Chat Support
Live Chat Support- Receive quick answers to your questions during business hours.
-
Fastest Shipping
Fastest Shipping- Orders ship within 24 hours. Exclusions Apply.
-
30 day return Guarantee
30 Day Guarantee- Refunds within 30 days of the original order date. Exclusions Apply.
Spec Sheet
- BrandaFe
- SKUafe51-74207
- UPC802959542248