Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver's disposal.
Simple Plug-and-Play Installation:
For vehicles with electronic control (ETC) systems, or drive by wire, this device plugs into the OE connector located behind the accelerator pedal. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. It does not affect other systems such as electronic injection, ABS, etc.
Three Acceleration Modes:
The three main acceleration modes can be switched by pressing the main button. When the LED is off, the Sprint Booster is deactivated, and the car has factory settings. In Sport Mode, the LED is green, and throttle response is improved by up to 30%. With the red colored LED, the Sprint Booster is in Race Mode, and it improves response by up to 60%.
18 Acceleration Programs:
Each acceleration mode comes with nine programs. Select 1-9 in SPORT mode and 1-9 in RACE mode, with '1' being the least aggressive program and '9' the most aggressive. The acceleration programs can be changed using the two arrow buttons on the top of the device. By selecting the desired acceleration program in each mode, the driver can fine-tune each mode per their driving style (e.g. select SPORT 9 & RACE 5).
Works for Both Automatic and Manual Transmissions:
Sprint Booster modes and programs are transmission type specific for better function and performance. The driver can select the transmission type through a slide switch located on the right side of the device. The device will then automatically adjust the programs according the type of transmission selected. There are 36 programs in total (18 for manual transmissions and 18 for automatic transmissions).
Valet and Pedal Lock Modes:
Valet mode limits the acceleration of the vehicle by 55%, 65%, or 75% (comes in three selectable levels). It is activated and deactivated with a three-digit PIN. By limiting the acceleration, there will be a significant reduction in the vehicle's performance. The Pedal Lock mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle through a 3 digit PIN. The menu for Valet and Pedal Lock mode is accessed when the vehicle is stationary and the Sprint Booster is off, by pressing the two arrow buttons simultaneously.
Better Drivability:
In addition to increased throttle response for effortless downshifts and safer overtaking, there is also a noticeable improvement to the transmission?s shifts (on vehicle?s equipped with automatic transmissions).
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Improve your vehicle's throttle response and overall drivability with this Sprint Booster Power Converter.
- Simple, Plug-and-Play Installation
- Ultra Compact Device Mounts in the Cabin
- 3 Acceleration Modes w/ 36 Acceleration Programs (18 Manual & 18 Automatic)
- Valet and Pedal Lock Mode Provide Protection Against Unauthorized Vehicle Use
- Works for Both Automatic and Manual Transmissions
ABOUT aFe POWER
advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.
We do so many cool things here at aFe POWER, but generally it takes someone getting a chance to tour the facility to really get the impact of everything that goes on “behind the scenes” here at our Southern California compound and what aFe is capable of. So here is your chance to take a peek, and I’m sure come back with the same phrase we hear so much. “I had no idea you guys did all of that!” Take a look at this video! In-house capabilities include manufacturing of air filters, air intake systems, exhaust systems, headers, torque converters, intercoolers, and feature CNC machining, CAD design, 3D printing, 3D scanning, fabrication, dyno testing, mandrel tube bending, flow and filtration testing, assembly, kitting, warehousing. and much more!
The aFe product line includes over 2,500 applications, which are all designed developed and manufactured in Corona, California. The aFe Power product line-up includes air filters, air intake and exhaust systems for most late model cars and trucks.
In the fall of 2007, aFe added diesel fluid filters for diesel applications. In 2008, aFe introduced the Aries 1 and Aries 2 filters and intakes for popular powersport applications. 2009 saw the release of the BladeRunner intercooler Intercooler for diesel applications as well as the Takeda USA intake line for sport compacts.
In 2012 aFe Power entered into the differential cover and transmission pan market. 2011 saw the release of a new turbocharger and Scorcher Programmer product lines. aFe produces three versions of air filter media including their original Pro 5R, Pro Guard 7 and Pro Dry S. The Pro 5R media is a five-layer cotton gauze media to maximize filtration and airflow. The patented Pro-Guard 7 is their seven-layer filter media combining the Pro 5R media with the addition of two additional layers of synthetic media. Both of these media require filter recharging oil. The Pro Dry S media is a three-layer synthetic media, requires no filter oil, and cleans with soap and water. All aFe Power filters are washable and reusable.
aFe specializes in the diesel truck performance aftermarket with a line-up of products for these applications. aFe’s Pro Guard D2 filter program includes oil, fuel and transmission filters. The Blade Runner intake manifold inlet manifold released in 2007, pushes toward complete air flow management systems. aFe produces exhaust systems for diesel applications.
LIMITED WARRANTY STATEMENT
aFe POWER Limited Warranty applies solely to products purchased from aFe POWER (online or by phone) or from an authorized aFe POWER retailer to be free from manufacturer’s defects due to workmanship and materials. The warranty period begins from the confirmed shipment arrival date and covers the applicable period in the warranty table. All warranty is limited to the repair or replacement of the aFe POWER product. Any warranty period will not be extended if we repair or replace the product.
- This warranty applies only to the original purchaser of the product and is non-transferable.
- Proof of Purchase is required for all warranty claims.
- Limited Lifetime Warranty products last for the lifetime of the product against manufacturer defects, not normal wear and tear. It is limited to the lifetime of the part and not of the vehicle.
- Warranty is valid given that all aFe POWER instructions for installation, service, and/or cleaning were properly followed.
- Proper maintenance with regular product inspections is required to ensure warranty coverage.
- Any part replaced under warranty will carry the remainder of the original warranty or 90 days, whichever is longer.
NOT COVERED UNDER AFE POWER LIMITED WARRANTY
- Any product not purchased directly from aFe POWER (online or by phone) or an aFe POWER authorized dealer and does not carry an original, valid Proof of Purchase
- For parts used on "race" vehicles
- Any product that is not within the Limited Warranty period or presented by the original purchaser
- Any costs or damages due to improper installation, abuse, improper maintenance, unauthorized repair, or alteration
- Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe POWER product
- Any products sold under aFe POWER’s Private Label Program
- All items labeled Closeout, Overstock, or Extra Savings are final sales and not covered under warranty.
WARRANTY CLAIM PROCESS
aFe POWER reserves the right to inspect any product to determine the warranty coverage. If a product is found to be defective, it will become the property of aFe POWER and be replaced. If a product is determined to be not covered under the Limited Warranty, it will be returned to you. All aFe POWER warranty decisions are final.
- To initiate a warranty claim, please submit your request with your original Order Number and Proof of Purchase to Tech Support.
- You will receive a Warranty Claim Number and an RGA (Returns Good Authorization) number to return the product. Be sure to retain both to track your claim.
- We will not send any replacement parts before receiving the warranty return.
- Allow 5 to 6 weeks for the warranty process. Replacement products are subject to availability.
Product Category | Warranty Duration | P/N Prefix |
Air Intake Systems | Components: 2 Years/Filter: Limited Lifetime | 5X, 75, F1, F2, TA, TL, TM, TR |
Cabin Air Filters | 90 Days | 35 |
Chemicals | 90 Days | 90 |
Component Parts | 90 Days | 03, 05, 59 |
Direct OE Replacement Filters | Limited Lifetime | 10, 11, 30, 31, 71, 73 |
EGR Coolers | 2 Years | 46-9 |
Exhaust Manifolds | 2 Years | 46-4 |
Exhaust Products | Components: 2 Years/Finish: 90 Days | 47, 48, 49 |
Expansion Tanks | Components: 2 Years/Finish: 90 Days | 46-51 |
Exterior | Components: 2 Years/Finish: 90 Days | 79-2 |
Fluid Filters | 90 Days | 44 |
Fuel System | 2 Years | 42 (except 42-31) |
Fuel Tank | Limited Lifetime | 42-31 |
H/D OE Replacement Filters | 2 Years | 70 |
Ignition Coils | 1 year | P/N Group 77-92 |
Intake Manifolds | Components: 2 Years/Finish: 90 Days | 46-1 |
Intercoolers & Charge Pipes | Components: 2 Years/Finish: 90 Days | 46-2 |
Marketing Gear | 90 Days | 40 |
Pans & Covers | Limited Lifetime | 46-7 |
Power Sports OE Replacement | 10 Years | 81, 87 |
Power Sports Intake Systems | 2 Years | 85 |
Pre-Filters | 2 Years | 28 |
Pulleys | Components: 2 Years/Finish: 90 Days | 79-1 |
Oil Coolers | 2 Years | 46-8 |
Radiators | 2 Years | 46-52, 46-53 |
Scorcher Modules | 1 Year | 77 |
Sprint Boosters | 3 Years | 77-1 |
Suspension - Direct Fit | Components: 2 Years/Finish: 90 Days | 1XX, 2XX, 3XX, 4XX, 5XX, 6XX, 7XX, 8XX, 37 |
Suspension - Universal Fit | 90 Days | 5XXXX, 6XXXX |
Throttle Body | 1 Year | 46-3 |
Throttle Body Spacers | 2 Years | 46-3 |
Turbochargers | 2 Years | 46-6 |
Universal Filters (including R-IAF) | 2 Years | 18, 20, 21, 23, 24, 72, TF |
DISCLAIMER
No other warranty expressed or implied applies, nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
PRICING / TYPOGRAPHICAL ERRORS
aFe POWER continuously provides real-time, accurate information and updates to our website and storefront. Due to the immediate nature of these updates, correcting any errors and/or omissions can happen anytime without prior notice. aFe POWER is not responsible for any additional charges, labor, loss, or damage incurred because of information, correct or incorrect, referenced, or products purchased by aFe POWER. aFe POWER and aFePower.com reserve the right to cancel undelivered orders based on inaccurate information.
Our Guarantee
-
Best price Guaranteed
Best Price Guaranteed
-
Live Chat Support
Live Chat Support- Receive quick answers to your questions during business hours.
-
Fastest Shipping
Fastest Shipping- Orders ship within 24 hours. Exclusions Apply.
-
30 day return Guarantee
30 Day Guarantee- Refunds within 30 days of the original order date. Exclusions Apply.
Spec Sheet
- BrandaFe
- SKUafe77-14007
- UPC802959774656