null Skip to main content

aFe Gemini XV Series Exhaust Systems 49-34140

$1,802.00
Write a Review

Free Ground Shipping on orders over $150.00

Adding to cart… The item has been added

Performance Gains:
This system produced gains of up to +11 HP and +13 lbs. x Ft. TQ., as measured on our in-house dyno.

4" to Dual 3" 304 Stainless Steel Tubing:
This system is constructed of durable mandrel-bent 4" to dual 3" 304 stainless steel tubing for maximum corrosion resistance. Mandrel-bent tubing for maximum air flow and low turbulence; increasing torque, horsepower and improved throttle response.

High-Flow Stainless Steel Muffler:
This system features a high-flow stainless steel muffler, producing a aggressive sound. Muffler finish may vary.

Aggressive Sound:
This system produces an aggressive sound unleashing all available horsepower and torque.

Interlock Flex Pipe:
This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.

Exhaust Valves:
This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics.

Sound on Demand:
This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button.

Hi-Tuck Design:
This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain.

Computer-Aided Design:
Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.

MIG-Welded:
100% MIG-Welded for race-proven strength and durability.

It may be necessary to cut the OE Exhaust to remove it from the vehicle.

Wheelbase Fitment:
Crew Cab / Short Bed (69.92")
Crew Cab / Standard Bed (79.44")
Double Cab / Standard Bed (79.44")

Sound Disclaimer:
This Exhaust System contains a cut-out, bypass, or similar device which will increase the exhaust tone emitted by the motor above that emitted by the factory muffler or exhaust originally installed on your vehicle. Please check your state and local laws before purchasing.

aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

Emissions Disclaimer

This product does not require a CARB EO#.

Fitment Note

This item will only fit models equipped with dual exhaust from the factory. Not recommended for vehicles with Factory Performance Dual Mode exhaust due to factory exhaust valve system and bumper with exhaust tip relief.

  • Up to +11 HP and +13 lbs. x Ft. TQ.
  • Constructed out of 4" and 3" Mandrel-Bent 304 Stainless Steel Tubing
  • Utilizes Factory Style Hangers for a Secure Fit
  • Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
  • 100% MIG-Welded for Strength and Durability
  • All Necessary Hardware is Included for a Hassle-Free Installation

    ABOUT aFe POWER

    advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA. 

    ​We do so many cool things here at aFe POWER, but generally it takes someone getting a chance to tour the facility to really get the impact of everything that goes on “behind the scenes” here at our Southern California compound and what aFe is capable of. So here is your chance to take a peek, and I’m sure come back with the same phrase we hear so much. “I had no idea you guys did all of that!” Take a look at this video! In-house capabilities include manufacturing of air filters, air intake systems, exhaust systems, headers, torque converters, intercoolers, and feature CNC machining, CAD design, 3D printing, 3D scanning, fabrication, dyno testing, mandrel tube bending, flow and filtration testing, assembly, kitting, warehousing. and much more!

    The aFe product line includes over 2,500 applications, which are all designed developed and manufactured in Corona, California. The aFe Power product line-up includes air filters, air intake and exhaust systems for most late model cars and trucks.

    In the fall of 2007, aFe added diesel fluid filters for diesel applications. In 2008, aFe introduced the Aries 1 and Aries 2 filters and intakes for popular powersport applications. 2009 saw the release of the BladeRunner intercooler Intercooler for diesel applications as well as the Takeda USA intake line for sport compacts.

    In 2012 aFe Power entered into the differential cover and transmission pan market. 2011 saw the release of a new turbocharger and Scorcher Programmer product lines. aFe produces three versions of air filter media including their original Pro 5R, Pro Guard 7 and Pro Dry S. The Pro 5R media is a five-layer cotton gauze media to maximize filtration and airflow. The patented Pro-Guard 7 is their seven-layer filter media combining the Pro 5R media with the addition of two additional layers of synthetic media. Both of these media require filter recharging oil. The Pro Dry S media is a three-layer synthetic media, requires no filter oil, and cleans with soap and water. All aFe Power filters are washable and reusable.

    aFe specializes in the diesel truck performance aftermarket with a line-up of products for these applications. aFe’s Pro Guard D2 filter program includes oil, fuel and transmission filters. The Blade Runner intake manifold inlet manifold released in 2007, pushes toward complete air flow management systems. aFe produces exhaust systems for diesel applications.

    LIMITED WARRANTY STATEMENT

    aFe POWER Limited Warranty applies solely to products purchased from aFe POWER (online or by phone) or from an authorized aFe POWER retailer to be free from manufacturer’s defects due to workmanship and materials. The warranty period begins from the confirmed shipment arrival date and covers the applicable period in the warranty table. All warranty is limited to the repair or replacement of the aFe POWER product. Any warranty period will not be extended if we repair or replace the product.

    • This warranty applies only to the original purchaser of the product and is non-transferable.
    • Proof of Purchase is required for all warranty claims.
    • Limited Lifetime Warranty products last for the lifetime of the product against manufacturer defects, not normal wear and tear. It is limited to the lifetime of the part and not of the vehicle.
    • Warranty is valid given that all aFe POWER instructions for installation, service, and/or cleaning were properly followed.
    • Proper maintenance with regular product inspections is required to ensure warranty coverage.
    • Any part replaced under warranty will carry the remainder of the original warranty or 90 days, whichever is longer.

     

    NOT COVERED UNDER AFE POWER LIMITED WARRANTY

    • Any product not purchased directly from aFe POWER (online or by phone) or an aFe POWER authorized dealer and does not carry an original, valid Proof of Purchase
    • For parts used on "race" vehicles
    • Any product that is not within the Limited Warranty period or presented by the original purchaser
    • Any costs or damages due to improper installation, abuse, improper maintenance, unauthorized repair, or alteration
    • Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe POWER product
    • Any products sold under aFe POWER’s Private Label Program
    • All items labeled Closeout, Overstock, or Extra Savings are final sales and not covered under warranty.

     

    WARRANTY CLAIM PROCESS

    aFe POWER reserves the right to inspect any product to determine the warranty coverage. If a product is found to be defective, it will become the property of aFe POWER and be replaced. If a product is determined to be not covered under the Limited Warranty, it will be returned to you. All aFe POWER warranty decisions are final.

    • To initiate a warranty claim, please submit your request with your original Order Number and Proof of Purchase to Tech Support.
    • You will receive a Warranty Claim Number and an RGA (Returns Good Authorization) number to return the product. Be sure to retain both to track your claim.
    • We will not send any replacement parts before receiving the warranty return.
    • Allow 5 to 6 weeks for the warranty process. Replacement products are subject to availability.
    Product Category Warranty Duration P/N Prefix
    Air Intake Systems Components: 2 Years/Filter: Limited Lifetime 5X, 75, F1, F2, TA, TL, TM, TR
    Cabin Air Filters 90 Days 35
    Chemicals 90 Days 90
    Component Parts 90 Days 03, 05, 59
    Direct OE Replacement Filters Limited Lifetime 10, 11, 30, 31, 71, 73
    EGR Coolers 2 Years 46-9
    Exhaust Manifolds 2 Years 46-4
    Exhaust Products Components: 2 Years/Finish: 90 Days 47, 48, 49
    Expansion Tanks Components: 2 Years/Finish: 90 Days 46-51
    Exterior Components: 2 Years/Finish: 90 Days 79-2
    Fluid Filters 90 Days 44
    Fuel System 2 Years 42 (except 42-31)
    Fuel Tank Limited Lifetime 42-31
    H/D OE Replacement Filters 2 Years 70
    Ignition Coils 1 year P/N Group 77-92
    Intake Manifolds Components: 2 Years/Finish: 90 Days 46-1
    Intercoolers & Charge Pipes Components: 2 Years/Finish: 90 Days 46-2
    Marketing Gear 90 Days 40
    Pans & Covers Limited Lifetime 46-7
    Power Sports OE Replacement 10 Years 81, 87
    Power Sports Intake Systems 2 Years 85
    Pre-Filters 2 Years 28
    Pulleys Components: 2 Years/Finish: 90 Days 79-1
    Oil Coolers 2 Years 46-8
    Radiators 2 Years 46-52, 46-53
    Scorcher Modules 1 Year 77
    Sprint Boosters 3 Years 77-1
    Suspension - Direct Fit Components: 2 Years/Finish: 90 Days 1XX, 2XX, 3XX, 4XX, 5XX, 6XX, 7XX, 8XX, 37
    Suspension - Universal Fit 90 Days 5XXXX, 6XXXX
    Throttle Body 1 Year 46-3
    Throttle Body Spacers 2 Years 46-3
    Turbochargers 2 Years 46-6
    Universal Filters (including R-IAF) 2 Years 18, 20, 21, 23, 24, 72, TF

    DISCLAIMER

    No other warranty expressed or implied applies, nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

     

    PRICING / TYPOGRAPHICAL ERRORS

    aFe POWER continuously provides real-time, accurate information and updates to our website and storefront. Due to the immediate nature of these updates, correcting any errors and/or omissions can happen anytime without prior notice. aFe POWER is not responsible for any additional charges, labor, loss, or damage incurred because of information, correct or incorrect, referenced, or products purchased by aFe POWER. aFe POWER and aFePower.com reserve the right to cancel undelivered orders based on inaccurate information.

    Our Guarantee

    • Best price Guaranteed
      Best Price Guaranteed
    • Live Chat Support
      Live Chat Support- Receive quick answers to your questions during business hours.
    • Fastest Shipping
      Fastest Shipping- Orders ship within 24 hours. Exclusions Apply.
    • 30 day return Guarantee
      30 Day Guarantee- Refunds within 30 days of the original order date. Exclusions Apply.

    Spec Sheet

    • BrandaFe
    • SKUafe49-34140
    • UPC802959634677
    • Brand

      Brand

      ABOUT aFe POWER

      advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA. 

      ​We do so many cool things here at aFe POWER, but generally it takes someone getting a chance to tour the facility to really get the impact of everything that goes on “behind the scenes” here at our Southern California compound and what aFe is capable of. So here is your chance to take a peek, and I’m sure come back with the same phrase we hear so much. “I had no idea you guys did all of that!” Take a look at this video! In-house capabilities include manufacturing of air filters, air intake systems, exhaust systems, headers, torque converters, intercoolers, and feature CNC machining, CAD design, 3D printing, 3D scanning, fabrication, dyno testing, mandrel tube bending, flow and filtration testing, assembly, kitting, warehousing. and much more!

      The aFe product line includes over 2,500 applications, which are all designed developed and manufactured in Corona, California. The aFe Power product line-up includes air filters, air intake and exhaust systems for most late model cars and trucks.

      In the fall of 2007, aFe added diesel fluid filters for diesel applications. In 2008, aFe introduced the Aries 1 and Aries 2 filters and intakes for popular powersport applications. 2009 saw the release of the BladeRunner intercooler Intercooler for diesel applications as well as the Takeda USA intake line for sport compacts.

      In 2012 aFe Power entered into the differential cover and transmission pan market. 2011 saw the release of a new turbocharger and Scorcher Programmer product lines. aFe produces three versions of air filter media including their original Pro 5R, Pro Guard 7 and Pro Dry S. The Pro 5R media is a five-layer cotton gauze media to maximize filtration and airflow. The patented Pro-Guard 7 is their seven-layer filter media combining the Pro 5R media with the addition of two additional layers of synthetic media. Both of these media require filter recharging oil. The Pro Dry S media is a three-layer synthetic media, requires no filter oil, and cleans with soap and water. All aFe Power filters are washable and reusable.

      aFe specializes in the diesel truck performance aftermarket with a line-up of products for these applications. aFe’s Pro Guard D2 filter program includes oil, fuel and transmission filters. The Blade Runner intake manifold inlet manifold released in 2007, pushes toward complete air flow management systems. aFe produces exhaust systems for diesel applications.

    • Fitment

      Fitment

    • Warranty

      Warranty

      LIMITED WARRANTY STATEMENT

      aFe POWER Limited Warranty applies solely to products purchased from aFe POWER (online or by phone) or from an authorized aFe POWER retailer to be free from manufacturer’s defects due to workmanship and materials. The warranty period begins from the confirmed shipment arrival date and covers the applicable period in the warranty table. All warranty is limited to the repair or replacement of the aFe POWER product. Any warranty period will not be extended if we repair or replace the product.

      • This warranty applies only to the original purchaser of the product and is non-transferable.
      • Proof of Purchase is required for all warranty claims.
      • Limited Lifetime Warranty products last for the lifetime of the product against manufacturer defects, not normal wear and tear. It is limited to the lifetime of the part and not of the vehicle.
      • Warranty is valid given that all aFe POWER instructions for installation, service, and/or cleaning were properly followed.
      • Proper maintenance with regular product inspections is required to ensure warranty coverage.
      • Any part replaced under warranty will carry the remainder of the original warranty or 90 days, whichever is longer.

       

      NOT COVERED UNDER AFE POWER LIMITED WARRANTY

      • Any product not purchased directly from aFe POWER (online or by phone) or an aFe POWER authorized dealer and does not carry an original, valid Proof of Purchase
      • For parts used on "race" vehicles
      • Any product that is not within the Limited Warranty period or presented by the original purchaser
      • Any costs or damages due to improper installation, abuse, improper maintenance, unauthorized repair, or alteration
      • Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe POWER product
      • Any products sold under aFe POWER’s Private Label Program
      • All items labeled Closeout, Overstock, or Extra Savings are final sales and not covered under warranty.

       

      WARRANTY CLAIM PROCESS

      aFe POWER reserves the right to inspect any product to determine the warranty coverage. If a product is found to be defective, it will become the property of aFe POWER and be replaced. If a product is determined to be not covered under the Limited Warranty, it will be returned to you. All aFe POWER warranty decisions are final.

      • To initiate a warranty claim, please submit your request with your original Order Number and Proof of Purchase to Tech Support.
      • You will receive a Warranty Claim Number and an RGA (Returns Good Authorization) number to return the product. Be sure to retain both to track your claim.
      • We will not send any replacement parts before receiving the warranty return.
      • Allow 5 to 6 weeks for the warranty process. Replacement products are subject to availability.
      Product Category Warranty Duration P/N Prefix
      Air Intake Systems Components: 2 Years/Filter: Limited Lifetime 5X, 75, F1, F2, TA, TL, TM, TR
      Cabin Air Filters 90 Days 35
      Chemicals 90 Days 90
      Component Parts 90 Days 03, 05, 59
      Direct OE Replacement Filters Limited Lifetime 10, 11, 30, 31, 71, 73
      EGR Coolers 2 Years 46-9
      Exhaust Manifolds 2 Years 46-4
      Exhaust Products Components: 2 Years/Finish: 90 Days 47, 48, 49
      Expansion Tanks Components: 2 Years/Finish: 90 Days 46-51
      Exterior Components: 2 Years/Finish: 90 Days 79-2
      Fluid Filters 90 Days 44
      Fuel System 2 Years 42 (except 42-31)
      Fuel Tank Limited Lifetime 42-31
      H/D OE Replacement Filters 2 Years 70
      Ignition Coils 1 year P/N Group 77-92
      Intake Manifolds Components: 2 Years/Finish: 90 Days 46-1
      Intercoolers & Charge Pipes Components: 2 Years/Finish: 90 Days 46-2
      Marketing Gear 90 Days 40
      Pans & Covers Limited Lifetime 46-7
      Power Sports OE Replacement 10 Years 81, 87
      Power Sports Intake Systems 2 Years 85
      Pre-Filters 2 Years 28
      Pulleys Components: 2 Years/Finish: 90 Days 79-1
      Oil Coolers 2 Years 46-8
      Radiators 2 Years 46-52, 46-53
      Scorcher Modules 1 Year 77
      Sprint Boosters 3 Years 77-1
      Suspension - Direct Fit Components: 2 Years/Finish: 90 Days 1XX, 2XX, 3XX, 4XX, 5XX, 6XX, 7XX, 8XX, 37
      Suspension - Universal Fit 90 Days 5XXXX, 6XXXX
      Throttle Body 1 Year 46-3
      Throttle Body Spacers 2 Years 46-3
      Turbochargers 2 Years 46-6
      Universal Filters (including R-IAF) 2 Years 18, 20, 21, 23, 24, 72, TF

      DISCLAIMER

      No other warranty expressed or implied applies, nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

       

      PRICING / TYPOGRAPHICAL ERRORS

      aFe POWER continuously provides real-time, accurate information and updates to our website and storefront. Due to the immediate nature of these updates, correcting any errors and/or omissions can happen anytime without prior notice. aFe POWER is not responsible for any additional charges, labor, loss, or damage incurred because of information, correct or incorrect, referenced, or products purchased by aFe POWER. aFe POWER and aFePower.com reserve the right to cancel undelivered orders based on inaccurate information.

    • Reviews

      Reviews

    RELATED PRODUCTS